質量標準

quality standard

1、扶欄和扶手的制作應與安裝所使用材料的材質、規格數量等應符合設計要求及國家標準的有關規定。

1. The fabrication of handrails and handrails shall be in accordance with the design requirements and relevant provisions of national standards.

2、扶欄和扶手的造型、尺寸及安裝位置應符合設計要求。

2. The shape, size and installation position of handrails and handrails shall meet the design requirements.

3、扶欄和扶手安裝預埋件的數量、規格、位置以及扶欄與預埋件的連接節點應符合設計要求。

3. The quantity, specification and position of embedded parts installed on handrails and handrails, as well as the connection node between handrails and embedded parts, shall meet the design requirements.

4、扶欄高度、欄桿間距、安裝位置必須符合設計要求。扶欄安裝必須牢固。

4. The height, spacing and installation position of handrails must meet the design requirements. Handrails must be firmly installed.

5、扶欄和扶手轉角弧度應符合設計要求，接縫嚴密平整，表面光滑，色澤一致。不得有裂縫、翹曲及損壞。

5. The angle radian of handrail and handrail shall meet the design requirements, with tight and flat joints, smooth surface and consistent color. There shall be no crack, warpage and damage.

應注意的質量問題：

Quality problems needing attention:

1、欄桿活動：原因為固定件沒有安裝在牢固的結構上，所用的膨脹螺栓的螺絲沒有擰緊，欄桿與固定件沒有焊接安裝牢固或開焊。所以在安裝固定件時，必須打眼安裝在原結構上，如有石材鋼骨架時，可與其連接。欄桿與固定件焊接時，必須達到焊接的質量要求，并清除焊藥。所使用的材料厚度必須符合設計要求。

1. Handrail movement: the reason is that the fixed parts are not installed on a firm structure, the screws of the expansion bolts used are not tightened, and the handrail and the fixed parts are not firmly installed or welded. Therefore, when installing the fixed parts, they must be drilled and installed on the original structure. If there is a stone steel framework, it can be connected with it. When the handrail is welded with the fixed parts, the welding quality requirements must be met, and the welding flux must be removed. The thickness of materials used must meet the design requirements.

2、扶手高度不一致，直線段不平：在安裝過程中，必須采用激光水平儀定好高度位置，以防出現扶手高度不一致。每個固定點必須緊固到位分布均勻的以防出現扶手平面突起的現象。

2. Inconsistent height of handrail and uneven straight-line section: during installation, the height position must be determined with a laser level to prevent inconsistent height of handrail. Each fixed point must be fastened in place and evenly distributed to prevent the protrusion of the handrail plane.

保證質量措施

Quality assurance measures

1．鐵藝護欄材料要求：所有鐵藝護欄材料及成品進場，必須有材質單，質量保證書。

1. requirements for iron guardrail materials: all iron guardrail materials and finished products must be provided with a material list and a quality guarantee.

2．施工人員上崗前，根據其不同工作崗位，進行技術與安全文明施工的教育。

2. before taking the post, the construction personnel shall carry out education on technology, safety and civilized construction according to their different positions.

3．在鐵藝護欄施工過程中由技術人員進行檢查，及時糾正施工現場違章操作等問題。提出質量整改單及質量問題更改措施，保證工程質量達到設計要求及驗收規范。

3. during the construction of iron guardrail, technicians shall inspect it and timely correct the illegal operation on the construction site. Put forward the quality rectification sheet and quality problem change measures to ensure that the project quality meets the design requirements and acceptance specifications.

4．嚴格執行工程質量標準，濟南鐵藝護欄的品種、規格、型號、厚度必須符合工程和設計要求，焊口滿焊，打磨光滑平整。做到美觀，制作尺寸準確，產品做到橫平豎直，符合設計要求及驗收標準。

4. strictly implement the engineering quality standards. The variety, specification, model and thickness of Jinan Tieyi guardrail must meet the engineering and design requirements. The welded junction must be fully welded and polished smooth. The product shall be beautiful and accurate in size. The product shall be horizontal and vertical, meeting the design requirements and acceptance standards.

總之，了解產品的相關問題或者有關內容，才能運用的越來越好，才能打下堅實的使用基礎，讓自己付出的時間精力得到回報，那么如果您想了解更多信息，就來關注我們網站www.hgxdgy.com吧，讓您滿載而歸！

In a word, only by understanding the relevant problems or contents of the product can you use it better and better, lay a solid foundation for use, and return your time, energy and money. If you want to know more information, please follow our website www.jnghbxg COM, let you return with a full load!